Wednesday 3 August 2011

1

How To Hack a Computer in a LAN Network

  • Wednesday 3 August 2011
  • saurav garg
  • Share
  • Today,I will write about hacking computer inside the LAN network. 

    This technique will be taking advantage of Port 139. 

    Most of the time, Port 139 will be opened.

    First of all,I will do a port scanning at the target computer which is 192.168.40.128(this can be any IP in your LAN network). Check your IP address then according to it search for IP related to it.

    I will scan it using Nmap Click here to download. After installation in the target box put the IP address which you want to scan and perform the quick scan.

    [Image: 1_13.jpg]

    I get the result and it shows Port 139 is opened up for me.

    Now you will need both of these tools:
    ** USER2SID & SID2USER
    ** NetBios Auditing Tool

     Here is the download link for both the softawares
    Download Tools.rar 

    After you get both of them,put them in the C:\ directory.

    [Image: 2_1.jpg]

    You now need to create a null session to the target computer.

    [Image: 3_3.jpg]

    Now open the Command Prompt and browse to the USER2SID & SID2USER folder.There will be 2 tools inside it,one will be USER2SID and another one will be SID2USER.

    We will first using USER2SID to get the ID.

    [Image: 4_10.jpg]

    We will test against the Guest account because Guest account is a built in account.

    After we get the ID,we need to do some modification on the ID.

    We take the ID we get from the guest account and modified it become 
    "5 21 861567501 1383384898 839522115 500".

    Please leave out the S-1-,leave out all the - too.

    [Image: 5_8.jpg]

    Now you will see that you get the username of the Administrator account.

    In this case,the Administrator account is Administrator.

    Create a text file called user.txt and the content will be the username of the Admin account.

    [Image: 6.jpg]

    Prepare yourself a good wordlist.

    [Image: 7.jpg]

    Now put both of them in the same directory with the NetBios Auditing Tool.

    [Image: 8.jpg]

    Now we are going to crack the Admin account for the password in order to access to the target computer.

    Browse to the NetBios Auditing Tool directory.

    [Image: 9_1.jpg]

    Press on enter and the tool will run through the passlist.

    [Image: 10.jpg]

    In this case,I have get the password.

    In order to proof that I can get access to the target computer using this password.

    [Image: 11.jpg]

    After you press enter,it will prompt you for the username and password.

    [Image: 12_6.jpg]

    Therefore,just input them inside the prompt and continue.

    [Image: 13.jpg]

    Target C drive will be on your screen.

    [Image: 14.jpg]

    In order to prevent from this attack,close down port that you do not want to use such as Port 135,Port 136,Port 137,Port 138 and Port 139.

    Subscribe us via E-mail and Add us on Facebook for daily updates and Plz also do click once on the ads displaying below or above the post for us.. :)

    1 Responses to “ How To Hack a Computer in a LAN Network ”

    Anonymous said...
    15 May 2012 at 01:34

    bull crap


    Post a Comment